Author Topic: Chumley Warner's Empire. 3D printing (Read 1801569 times)

harv · « **Reply #6100 on:** August 03, 2014, 09:03:18 PM »

Also has anyone posted this unreleased Hero Quest Wizard yet and are you aware of him and if so have you painted him yet?

Sikander · « **Reply #6101 on:** August 03, 2014, 09:12:49 PM »

Great stuff as always

think that sergeant is one of the characters

Characters - MED126

http://www.wargamesfoundry.com/our-ranges/ex-citadel/men-arms/infantry

mr chumley warner · « **Reply #6102 on:** August 04, 2014, 07:17:47 AM »

C26 , I was thinking as much.

The problem with the C26 range, is that it wasn't documented.

The good thing is , Foundry have the entire range, re cast.

It's on my list to buy

Quickbeam · « **Reply #6103 on:** August 04, 2014, 04:40:09 PM »

Quote from: mr chumley warner on August 04, 2014, 07:17:47 AM

C26 , I was thinking as much.

The problem with the C26 range, is that it wasn't documented.

The good thing is , Foundry have the entire range, re cast.

It's on my list to buy

But that's cheating! Just like all the foundry norse! It's not citadel!

mr chumley warner · « **Reply #6104 on:** August 04, 2014, 05:23:09 PM »

na it's the same !

mr chumley warner · « **Reply #6105 on:** August 05, 2014, 07:46:17 AM »

Quote from: harv on August 03, 2014, 09:03:18 PM

Also has anyone posted this unreleased Hero Quest Wizard yet and are you aware of him and if so have you painted him yet?

You sir have been looking at Brian Ansell's collection

I don 't have this wizard, and I suspect it's mega rare

Midaski · « **Reply #6106 on:** August 05, 2014, 08:34:54 AM »

Quote from: Quickbeam on August 04, 2014, 04:40:09 PM

Quote from: mr chumley warner on August 04, 2014, 07:17:47 AM
C26 , I was thinking as much.

The problem with the C26 range, is that it wasn't documented.

The good thing is , Foundry have the entire range, re cast.

It's on my list to buy
But that's cheating! Just like all the foundry norse! It's not citadel!

The thing is that if you paint and base them, then it is quite difficult to tell if they have a slottabase or a moulded one .............

mr chumley warner · « **Reply #6107 on:** August 05, 2014, 08:18:16 PM »

GW only listed the C26 range in a couple of White Dwarfs, as Men at Arms and something else ,

anyway , the range was massive, Foundry have bought all the casts.

With GW it's impossible to tell what was even made in slotta format.

Hence I am going to just buy the whole 330 ish Foundry Models

Midaski · « **Reply #6108 on:** August 05, 2014, 09:16:33 PM »

Remembering that they were also 25mm scale, when you stick them on a slottabase and then use a bit of filler to blend the model's base in, they then fit well with later larger minis.

Silver Wolf · « **Reply #6109 on:** August 05, 2014, 11:08:40 PM »

Hey chumley here's a bit more detail about the unreleased stuff you posted earlier:
http://www.cmdante.com/2010_04_01_archive.html

As I mentioned earlier, they were trainee sculpts made by Giorgio Bassani back in 2010.
However, it seems like they were never cast.

I hope that helps to shine the light on those mysterious models.

mr chumley warner · « **Reply #6110 on:** August 06, 2014, 07:28:41 AM »

Dang !

Citadel Collector · « **Reply #6111 on:** August 06, 2014, 12:07:14 PM »

Quote from: mr chumley warner on August 05, 2014, 07:46:17 AM

Quote from: harv on August 03, 2014, 09:03:18 PM
Also has anyone posted this unreleased Hero Quest Wizard yet and are you aware of him and if so have you painted him yet?

You sir have been looking at Brian Ansell's collection

I don 't have this wizard, and I suspect it's mega rare

It seems Jes Goodwin may have solved this mystery - see http://eldritchepistles.blogspot.co.uk/2014/08/update-on-unreleased-unseen-heroquest.html for my updated blog post.

mr chumley warner · « **Reply #6112 on:** August 06, 2014, 12:12:17 PM »

Does Jes Goodwin have the models

?

Has he seen my PLOG yet?

Citadel Collector · « **Reply #6113 on:** August 06, 2014, 12:31:26 PM »

Quote from: mr chumley warner on August 06, 2014, 12:12:17 PM

Does Jes Goodwin have the models ?

Has he seen my PLOG yet?

No, and don't know

Zak · « **Reply #6114 on:** August 06, 2014, 05:18:33 PM »

you know Jes Goodwin?? nice

mr chumley warner · « **Reply #6115 on:** August 10, 2014, 07:15:53 PM »

I've secured 40 6th edition metal greatswords , for a surprisingly fair £2 / model ,

somegeezer · « **Reply #6116 on:** August 10, 2014, 07:24:35 PM »

Cheaper than the plastics, even

mr chumley warner · « **Reply #6117 on:** August 10, 2014, 07:27:37 PM »

I'm seriously considering a radical colour scheme !

Red armour plates, and cream puff and slash garments on every man

with maybe a turquoise feather on each hat ,

haha

Cam · « **Reply #6118 on:** August 10, 2014, 07:50:27 PM »

I'm wondering why that wizard put his glove on his staff. It does look odd...

mr chumley warner · « **Reply #6119 on:** August 10, 2014, 08:42:44 PM »

Wowser , so i'm looking at 6th edition greatswords online , google images, cmon, we etc,

Then I find this!

http://www.coolminiornot.com/320364?browseid=9834762

Zak · « **Reply #6120 on:** August 10, 2014, 09:20:06 PM »

wow

mottdon · « **Reply #6121 on:** August 11, 2014, 12:47:35 PM »

Those are awesome, though, the skin tone and sickly green color make them look a bit...undead. I really like how they brought out the armor, anyway. Professionals...*sigh*.

Midaski · « **Reply #6122 on:** August 11, 2014, 04:31:33 PM »

What's going on with the chainmail though?
It looks a terrible sculpt - rather than the painting.

Sikander · « **Reply #6123 on:** August 12, 2014, 12:14:58 AM »

very nice!

I really like the command figures from this set

mr chumley warner · « **Reply #6124 on:** August 15, 2014, 04:37:24 PM »

What you recon all?

Think 60 like this

News:

Author Topic: Chumley Warner's Empire. 3D printing (Read 1801569 times)